- Floor Mats
- Entrance Floor Mats
- Water Absorbent Mat
- Dirt Absorbing Mats
- Anti Slip Mat
- Non Slip Mat
- Anti Skid Mat
- Anti Fatigue Mat
- Dirt & Water Trapper Mats
- Carpet Protector Mat
- Chair Mat
- Coconut Husk Mat
- Door Mat
- Clean Room Floor Mat
- ESD Mat
- Non Conductive Switchboard Mat
- Kitchen Floor Mat
- Coin Flooring
- Heavy Duty Floor Mats
- Safety Floor Mat
- Toilet Floor Mat
- Bathroom Floor Mat
- Washroom Floor Mats
- Laundry Mat
- Coil Mat
- Commercial Floor Mats
- Rubber Mat
- Industrial Mat
- PVC Coil Tikar
- Tikar System Coil
- Tikar Lantai
- Tikar System Tulang Rusuk
- Car Mat
- Koymat Car Mat
- Ecoformat Car Mat
- 3M Nomad
- Rubber Edging
- Custom Size Floor Mats
- Corrugated Switchboard Mat
- High Voltage Insulation Rubber Mat
- Premier Grade Roll Mats
- Gym Rubber Flooring
- EVA Foam Mat
YGGS World Sdn Bhd
Belakang 233, Jalan Batu Maung, 11960 Bayan Lepas, Penang, Malaysia.
+6016-4471417
+604-6266998
+604-6266998
+604-6266118
Sticky Mat
- Floor Mat Supplier Malaysia
- Floor Mat Malaysia
- Floor Mat Supplier
- Door Mat malaysia
- Door Mat Supplier
YGGS WORLD SDN. BHD. (841230-U)
ST2436A Cleanroom Sticky Mat
ST2645A Cleanroom Sticky Mat
ST2436T Cleanroom Sticky Mat
ST2645T Cleanroom Sticky Mat
Sticky Mat • Clean Room Mats • Tacky Mat • Disposable Sticky Mats • Cleanroom Floor Mats
Cleanroom Tacky Mats
~ Standard Size
Sticky Mat – Ecoformat
Ecoformat – ST2436A/ST2645A/ST2436T/ST2645T/ST2436B/ST2645B
Cleanroom Sticky Mat (Sticky Mat/Tacky Mat) was test under by SGS, complied and passed under below requirement.
1. VDA270 Odor Test : Low odor or no bad smell will been produce when use indoor.
SGS TEST CERTIFICATES :
* SGS is the world’s leading inspection, verification, testing and certification company.
SGS recognized as the global benchmark for quality and integrity.
1) CANML 1913027101
• Cleanroom sticky mats are made of polyethylene film. Sticky mat provide a tacky surface which remove dirt and
debris off shoe soles before enter a sanitary sensitive (clean room) environment.
• The fast, convenient, reliable way to clean shoe soles before enter the clean room.
• It is easy to use, dirt layer can be disposed easily.
Common application : • Clean room or a sanitary-sensitive room and also not limited to any areas required high
sanitary environment, i.e. Labs, office entrance, dust/dirt free environment production
entrance and widely used in industries such as electronics, medical appliance, computer,
instrument, pharmaceutical, aerospace, especially in the semiconductor factory.
Characteristics : No folding mark, no pollution, no puncture hole,
Even adhesive strength, high durability.
Packing : • Pack in carton box.
• Carton box should be keep clean and undamaged.
Handling Conditions : • Store flat (Horizontal) – Do not store vertical.
• Keep dry and do not bend.
• Avoid the direct contact with sunlight.
• Store in an airy area.
• Stick the mat on the surface without water, oil and dirt.
ST2436A Cleanroom Sticky Mat
ST2645A Cleanroom Sticky Mat
ST2436T Cleanroom Sticky Mat
ST2645T Cleanroom Sticky Mat
Sticky Mat • Clean Room Mats • Tacky Mat • Disposable Sticky Mats • Cleanroom Floor Mats
Cleanroom Tacky Mats
~ Standard Size
Sticky Mat – Ecoformat
Ecoformat – ST2436A/ST2645A/ST2436T/ST2645T/ST2436B/ST2645B
Cleanroom Sticky Mat (Sticky Mat/Tacky Mat) was test under by SGS, complied and passed under below requirement.
1. VDA270 Odor Test : Low odor or no bad smell will been produce when use indoor.
SGS TEST CERTIFICATES :
* SGS is the world’s leading inspection, verification, testing and certification company.
SGS recognized as the global benchmark for quality and integrity.
1) CANML 1913027101
• Cleanroom sticky mats are made of polyethylene film. Sticky mat provide a tacky surface which remove dirt and
debris off shoe soles before enter a sanitary sensitive (clean room) environment.
• The fast, convenient, reliable way to clean shoe soles before enter the clean room.
• It is easy to use, dirt layer can be disposed easily.
Common application : • Clean room or a sanitary-sensitive room and also not limited to any areas required high
sanitary environment, i.e. Labs, office entrance, dust/dirt free environment production
entrance and widely used in industries such as electronics, medical appliance, computer,
instrument, pharmaceutical, aerospace, especially in the semiconductor factory.
| Material | Low Density Polyethylene |
| Thickness | 0.035mm (± 0.005mm) |
| 0.04mm (± 0.005mm) | |
| Tensile Strength | Transverse ≥ 12Mpa, Lengthways ≥ 20Mpa |
| Elongation | Transverse ≥ 300%, Lengthways ≥ 200% |
| Adhesive | Water-based Acrylic |
| Tackiness | 300-1000g/25mm |
| 180° Peeling Strength | Standard Mat For Footwear - 2.5N/25mm |
| Mat for Trolley & Footwear - 1.0N/25mm | |
| Size | 24'' x 36'' , 26'' x 45'' |
| Layers | 30 Sheets |
| Packaging | 8 Mats/Carton |
| Color | Blue |
Characteristics : No folding mark, no pollution, no puncture hole,
Even adhesive strength, high durability.
Packing : • Pack in carton box.
• Carton box should be keep clean and undamaged.
Handling Conditions : • Store flat (Horizontal) – Do not store vertical.
• Keep dry and do not bend.
• Avoid the direct contact with sunlight.
• Store in an airy area.
• Stick the mat on the surface without water, oil and dirt.